High Speed Two Layer Cable Extrusion Line

Description :

• Two layer die head extrusion line used in stainless steel construction
• Cable is repeatedly wrapped around the deflection pulley
• Water flow controlled by manually adjusted values.
• Efficient transmission of the tractive forces
• Smooth transmission force
• Essential for the best possible production
• Cable dia ranges from 10mm to 50mm

Specifications of high speed two layer cable extrusion line :

Model Motor load (HP) Max RPM L/D Ratio Heating power (KW) Prod. Kg/Hr (PVC) Prod. Kg/Hr (XLPE) 45/30 10/5 70/70 26/26 10/5 60 - 45/45 10/10 70/70 26/26 10/10 80 50 65/45 20/10 70/70 26/26 12/10 120 85 100/65 40/20 60/70 26/26 22/12 280 200

HC 400 HC 630 HC 800 HC 1000 Wheel dia 400 630 800 1000 Max. traction force (Kg) 200 500 800 1000 Max. dia of cable (mm) 10 20 30 40 Max speed m/min 400 250 150 80 AC drive (HP) 2 3 5 75

Technical Specifications for Two Layer Cable Extrusion Line:

Model Moto Load (HP) Max RPM L/D Ratio Heating Power (KW) Production Kg/Hr PVC Production Kg/Hr (XLPE) 45/30 10/5 70/70 26/26 10/5 60 - 45/45 10/10 70/70 26/26 10/10 80 50 65/45 20/10 70/70 26/26 22/12 280 200 100/65 40/20 60/70 26/26 22/12 280 200

Technical Specifications for Single Layer Cable Extrusion Line:

Model Motor Load (HP) Max RPM L/D Ratio Heating Power (KW) Production Kg/Hr (PVC) Production Kg/Hr (XLPE) HPMC 30 5 70 26 5 20 - HPMC 45 10 70 26 10 40 25 HPMC 65 20 70 26 12 80 60 HPMC 75 30 70 26 16 120 90 HPMC 90 40 60 26 20 150 115 HPMC 100 40 60 26 22 200 140 HPMC 120 60 60 26 30 350 250