|
|
|
|
| |
 |
|
|
| |
|
|
| |
| |
SINGLE SCREW PLANT FOR PPR PIPE |
|
|
|
| |
Product Description: |
|
| |
This is not real text, however, is placed as filler for the original content of the site replaceable for later on. This dummy text helps a website to retain its alignment and exact placement with reference to design aspect of the website and hence help the website to retain its designing aspect still with the best impact. |
|
| |
|
|
| |
Advantages of PPR Pipe |
|
| |
 |
PPR-C stands for Poly Propylene Random Co Polymer. It is a water supply pipe used in construction. It is an internationally approved, high quality, environmentally friendly and
energy saving pipe |
|
It is lightweight : Density is 0.89-0.92g / CM3, only i.e. 1 / 9 of steel pipe, therefore easy to transport and install |
|
Fine anti – heat performance : It is resistant to extreme heat/ cold and will not deform or give in between - 200 C and +950 environmental temperatures |
|
Good anti- corrosion property : It is resistant to corrosion and does not rust, decay or erode |
|
Low heat conduction factor : Heat conduction is 0.23-0.24W/ mk at 200C. It is much lower than that of galvanized steel pipe |
|
It endures to heat and high climatic temperatures. It reserves its original form, flexibility and chemical properties at high temperatures |
|
Firm pipe fittings connection : Because polypropylene has fine thermal casting performance. Thermal casting between the pipe and pipe fittings with the same material as an
integration, it can prevent water from leaking |
|
The friction correlation is very low, the surface is clean and smooth and will not hold other particles to fill in cavities |
|
Reasonable price : The price of PPR pipe is near to that of galvanized pipe. The adhesion is very simple and easy by fusiotherm welding. Adhesion is firm and will not affect
the inner diameter. In the three layer PPR pipe, the inner layer is anti-bacterial and the outer layer in UV (ultraviolet) rays resistant layer. It can be safely used for a duration of
minimum 50 years. It is resistant to long term hot water transmission and under normal environmental conditions, enduring operational heat 700 -950. It does not absorb
water, therefore may be safely used in hot temperature and humid climates |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| MODEL(Grove Feed Type) |
HPMC 65 |
HPMC 75 |
HPMC 90 |
| |
|
|
| Pipe Range (mm) |
16 - 63 |
16 - 110 |
63 - 160 |
| Capacity (kg/hr) |
90 |
125 |
160 |
| Main Motor (kw) |
37 |
55 |
75 |
| Haulling Speed (max. m/min) |
2 - 8 |
2 - 8 |
2 - 8 |
| |
|
|
| Vaccum Tank |
|
|
| Pump Drive ( KW) |
2.2 |
3.7 |
3.7 & 2.2 |
| Length ( Mtrs) |
6 |
6 |
6 |
| |
| Water Tank |
|
|
| Pump Drive (kw) |
3.7 |
3.7 |
3.7 |
| Length ( mtrs) |
- |
6 |
6+6 |
| |
| Total Power (kw) |
80 |
105 |
140 |
| Line length (m) |
30 |
38 |
50 |
|
|
| |
|
|
| |
We manufacture and export plastic processing machinery like Plastic Extruder, Twin Screw Extruder, PVC Pipe Plant, Pipe Extruder, HDPE Pipe Plant, Recycling machine, Plastic Reprocessing Plant, Co-Rotating Extruder, Drip Irrigation, Compounding Extruder, Pipe Machinery, PVC Casing Caping Machinery, Plastic Profile Machinery, LLDPE Pipe Plant and all kinds of Extrusion Machinery and Plastic Machinery. |
|
| |
|
|
| |
>> Back |
|
|
|
