|
Two stage cascade type recycling plant |
|
Request
a quote
|
|
Applications : Dual Diameter Extruder for Re processing
of Rafia, LD, HD, PP paper form waste ( " First time in
India " ) Agglomerator is not required.
Two stage recycling
plant for production up to 200 KG/ HR
Description :
-
First time in India production
up to 200 kg/hr from special design "Dual Diameter
of Screw" for reprocessing of RAFIA, HD, LD, PP
paper form waste.
-
This design eliminate or
minimize the shredding, grinding, densification
preparation functions.
-
The combination of the greater
feed capacity of the large diameter plasticizing section
provides an effective and economical operation.
Specifications of two stage recycling plant :
Screw Design
Dual Diameter (150mm-110mm) design with a large
diameter feed transitioning down to the smaller
diameter main processing section. The flights are hard
surfaced with gas nitriding with hardness from 65
HRC-68 HRC.
Feed Section
Featuring a generous feed throat opening and adequate
water cooling jacket to prevent bridging, this
essential component is designed to efficiently feed
pallets, beeds, powder or paper form waste into the
screw flights without thrust contamination.
Second Stage Extruder
Technique is based on "Two Stage Extrusion"
for excellent filteration & material properties.
Hydraulic Screen Changer
Hydraulic screen changer is provided for high
efficiency and less wastage of raw material.
Gear Box
Helical gear box with heavy thrust bearing for both
the extruder's.
|
Technical Specifications for PVC Pipe Extrusion Line:
| |
Production (Kg / Hr)
|
Dual Dia of Screw (mm)
|
Main Motor (HP)
|
Heating Load (Kw)
|
2nd stage
Extruder Screwdia (mm)
|
Hydraulic Screen changer
(Inch/ HP)
|
Main Motor (HP)
|
Heating load (Kw)
|
Heating zone Panel (Nos.)
|
Feeder Motor (HP)
|
|
Extruder 110
|
175-200
|
150-110
|
50
|
24
|
120
|
8/3
|
15
|
8
|
9
|
2
|
|
Extruder 100
|
140-160
|
145-100
|
40
|
20
|
115
|
7/3
|
15
|
6
|
8
|
2
|
|
|
|
|
| Model |
Production (Kg/ Hr)
|
Dual Dia of screw (mm)
|
Main Motor (HP)
|
Heating Load (Kw)
|
2nd stage Extruder
Screwdia
|
Hydraulic Screen Changer
(inch/Hp)
|
Main Motor (Kw)
|
Heating Load (Kw)
|
Heating Zone Panel (nos)
|
Feeder Motor (HP
|
|
Extruder 110
|
175-200
|
150-110
|
50
|
24
|
120
|
8/3
|
15
|
8
|
9
|
2
|
|
Extruder 100
|
140-160
|
145-100
|
40
|
20
|
115
|
7/3
|
15
|
6
|
8
|
2 |
|
|
|
|
Salient Features:
- First time in India production upto
200 kg/Hr from special design
"DUAL DIAMETER OF SCREW" for
reprocessing of RAFIA,HD,LD, PP paper
form waste.
- This design eliminates or minimizes
the shredding, grinding, densification
preparation functions.
- The combination of the greater feed
capacity of the large diameter
plasticizing section provides an
effective and economical operation.
- Screw design: Dual Diameter (150mm -
110mm) design with a large diameter
feed transitioning down to the smaller
diameter main processing section. The
flights are hard surfaced with Gas
Nitriding with hardness from 65 HRC -
68 HRC.
- Feed Section: Featuring a generous
feed throat opening and adequate water
cooling jacket to prevent bridging,
this essential component is designed
to efficiently feed pallets, beeds,
powder or paper form waste into the
screw flights without thrust
contamination.
- Second stage extruder: Technique is
based on "Two stage
extrusion" for excellent
filtration & material properties.
- Hydraulic screen changer is provided
for efficiency and less wastage of raw
material.
- Force feeder ( Ram Type) is also
provided for forced & continuous
feeding of paper from waste into the
barrel.
- Gearbox: Helical gearbox with heavy
thrust bearing for both the extruders.
|
|
|
|